Supports FinCap or JAWS screed chairs
Accepts 1/2″ x 6 right-hand thread coil rod
1-3/4″ (45mm) adjustability with nut and washer
Stay-in-place form secures to wood deck with nails, to metal deck with screws
Snaps into the Base Plate 4.5 for expanded use
Holds up to 1,000 lbs when used with the FinCap with a steel threaded rod assembly
Non-conductive and non-corrosive construction makes them ideal to use in bridge decks, waterways, and power plant concrete projects
Made in USA
 
CoilStand product data sheet link
 
 
The CoilStand is made of impact resistant material and is virtually unbreakable. It can be used in a variety of ways on multiple surfaces. The FinStand supports the FinCap or JAWS screed supports with a 1/2″ x 6 right-hand thread coil rod. The stand can be adjusted 1.75″ (45 mm) using a nut and washer to accommodate any variation in the deck. See the chart below for rod length needed for the desired floor depth. The FinStand secures to a metal deck using #8 or #10 tek screws or nails for a wood deck.