Includes 100 FinCaps and 100 FinStands
Stay-in-place forms adjusts vertically 1-3/4″ (45mm)
Threaded rod cut to length determines height. See Slab Depth Chart
Supports 1-1/2″ (40 mm) Pipe (1.5″ ID/1.9″ OD)
Space 3-4′ apart (1 m)
Minimum height of the assembly using a 1-1/2”ID pipe from the bottom of the FinStand to the finished elevation of concrete is 4-5/8”″ (117 mm)
Use steel threaded rod for slabs over 8″ (200mm)
Threaded rod sold separately
For use on elevated decks, sloped slabs, bridges, super flat floors and more
Non-conductive and non-corrosive construction makes them ideal to use in bridge decks, waterways, and power plant projects
 
FinCap product data sheet
FinStand product data sheet
 
 
Package includes 100 FinCaps and 100 FinStand supports
 
FinCap
The patented, non-metallic MAKO FinCap fits on the ½” x 13 threaded rod which is secured to the FinStand. The FinCap supports a nominal 1-1/2″ (40 mm) – schedule 40 or higher – galvanized pipe (1.5″ ID/1.9″ OD).  
 
FinStand
The FinStand is made of impact resistant material and is virtually unbreakable. The FinStand supports with a 1/2″ all-thread. The stand can be adjusted 1.75″ (45 mm) using a nut and washer to accommodate any variation in the deck. See the chart below for rod length needed for the desired floor depth. The “fins” inside the barrel hug the rebar or stake so it will not bounce off during placement. The FinStand secures to a metal deck using #8 or #10 tek screws or nails for a wood deck.
 
Use the MAKO Driver with the JAWS Small Screed Chairs to provide accurate setup every time.