Includes 100 JAWS Small and 100 FinStands
Stay-in-place forms adjusts vertically 1-3/4″ (45mm)
Threaded rod cut to length determines height. See Slab Depth Chart
Supports 1-1/2″ wide screed – Aluminum, Magnesium, or wood 2×4 
Space 3-4′ apart (1 m)
Minimum height using a wood 2x4 from the bottom of the FinStand to the finished elevation of concrete is 6-1/4” (158 mm)
Use steel threaded rod for slabs over 8″ (200mm)
Threaded rod sold separately
For use on elevated decks, sloped slabs, bridges, super flat floors
Non-conductive and non-corrosive construction makes them ideal to use in bridge decks, waterways, and power plant projects
 
JAWS Small product data sheet
FinStand product data sheet
 
 
Package includes 100 JAWS Small screed chairs and 100 FinStand supports
 
JAWS Small
JAWS Small Screed Chairs are designed for a variety of screed rail sizes from 1/4″ (6 mm) to 1-1/2” (40 mm). All the JAWS chairs fit rebar or rods from 3/8″ (10mm) to 5/8″ (16 mm). The “fins” inside the barrel hug the rebar or stake so it will not bounce off during placement.
 
JAWS is made of impact resistant material and is virtually unbreakable. It can be setup a in various configurations using the FinStand and Base Plate and works on several different applications.
 
FinStand
The FinStand is made of impact resistant material and is virtually unbreakable. The FinStand supports with a 1/2″ all-thread. The stand can be adjusted 1.75″ (45 mm) using a nut and washer to accommodate any variation in the deck. See the chart below for rod length needed for the desired floor depth. 
 
Use the MAKO Driver with the JAWS Small Screed Chairs to provide accurate setup every time.